Don Slice <dslice@cumulusnetworks.com>: Author Summary

Builds triggered by Don Slice <dslice@cumulusnetworks.com>

Builds triggered by an author are those builds which contains changes committed by the author.
342
163 (48%)
179 (52%)

Breakages and fixes

Broken means the build has failed but the previous build was successful.
Fixed means that the build was successful but the previous build has failed.
104 (30% of all builds triggered)
16 (5% of all builds triggered)
-88
Build Completed Code commits Tests
FRR › FRR › #2138 3 weeks ago
zebra: resolve issue with protocol route-map not applied properly
Problem reported that route-maps applied to "ip protocol table bgp"
would not be invoked if the ip protocol table command was issued
after the bgp prefixes were installed.  Found that a recent change
improving how often nexthop_active_update runs missed causing this
filtering to be applied. This fix resolves that issue as well as
a couple of other places that were problematic with the recent
change.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
6613 passed
FRR › FRR › #2135 3 weeks ago
tools: frr-reload.py stop bouncing peers on bfd timer change
Problem reported that if a bgp neighbor had a bfd timer change
made in frr.conf and systemctl reload frr performed, the neighbor
with the timer changed bounced.  If the change is made in vtysh
by just adding the new timer values, no peer bounce occurs.  This
fix skips the delete part of the delete/add process in frr-reload
so the peers stay up.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
1 of 6655 failed
You have insufficient permissions to see all of the builds.
Build Completed Code commits Tests
FRR › FRR › #2135 3 weeks ago
tools: frr-reload.py stop bouncing peers on bfd timer change
Problem reported that if a bgp neighbor had a bfd timer change
made in frr.conf and systemctl reload frr performed, the neighbor
with the timer changed bounced.  If the change is made in vtysh
by just adding the new timer values, no peer bounce occurs.  This
fix skips the delete part of the delete/add process in frr-reload
so the peers stay up.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
1 of 6655 failed
FRR › FRRPULLREQ › #6035 5 months ago
zebra: handle neighbor delete from kernel for ipv4 link-local
Problem reported that kernel neighbor entries could end up in "FAILED"
state when the neighbor entry was deleted.  This fix handles the
notification of the event from netlink messages and re-inserts the
deleted entry.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
5932 passed
FRR › TOPOPR › #385 5 months ago
staticd: install static routes in a vrf when next-hop interface comes up
Problem reported with cross-vrf static routes that the routes weren't
installed when the target interface is bounced.  Determined that we did
not initiate re-install of the statics in that particular case, so added
it. Test case previously failing now passes.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
staticd: remove stale header info in static_fixup_intf_nh
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
4 of 1240 failed
FRR › FRR › #1712 6 months ago
staticd: remove stale header info in static_fixup_intf_nh
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
staticd: install static routes in a vrf when next-hop interface comes up
Problem reported with cross-vrf static routes that the routes weren't
installed when the target interface is bounced.  Determined that we did
not initiate re-install of the statics in that particular case, so added
it. Test case previously failing now passes.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
8 of 7016 failed
FRR › TOPOPR › #383 6 months ago
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
bgpd: make name of default vrf/bgp instance consistent
Problems were reported with the name of the default vrf and the
default bgp instance being different, creating confusion.  This
fix changes both to "default" for consistency.

Ticket: CM-21791
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7658
Testing: manual testing and automated tests before pushing
5 of 1240 failed
FRR › TOPOPR › #382 6 months ago
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
bgpd: make name of default vrf/bgp instance consistent
Problems were reported with the name of the default vrf and the
default bgp instance being different, creating confusion.  This
fix changes both to "default" for consistency.

Ticket: CM-21791
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7658
Testing: manual testing and automated tests before pushing
6 of 1240 failed
FRR › TOPOPR › #381 6 months ago
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
4 of 1270 failed
FRR › TOPOPR › #378 6 months ago
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
7 of 1116 failed
FRR › TOPOPR › #377 6 months ago
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
696 passed
You have insufficient permissions to see all of the builds.
Build Completed Code commits Tests
FRR › FRR › #1738 5 months ago
zebra: handle neighbor delete from kernel for ipv4 link-local
Problem reported that kernel neighbor entries could end up in "FAILED"
state when the neighbor entry was deleted.  This fix handles the
notification of the event from netlink messages and re-inserts the
deleted entry.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
6912 passed
FRR › FRR › #1668 6 months ago
zebra: add json support to show evpn mac vni <num> mac <mac>
Added the json output capability in order to improve troubleshooting
capabilities.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
zebra: remove space from json string for show evpn mac vni <num> mac <mac>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
6931 passed
FRR › FRR › #1223 11 months ago
zebra: re-install static routes needed vrf when the vrf intf comes up
Problem reported that if the vrf device is taken down and then brought
back up, any static route referencing that vrf device was not
re-installed.  This fix runs back thru the static routes that
reference the vrf device coming up and re-install them.

Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
7006 passed
You have insufficient permissions to see all of the builds.