Julien Courtat <julien.courtat@6wind.com>: Author Summary

Builds triggered by Julien Courtat <julien.courtat@6wind.com>

Builds triggered by an author are those builds which contains changes committed by the author.
3
0 (0%)
3 (100%)

Breakages and fixes

Broken means the build has failed but the previous build was successful.
Fixed means that the build was successful but the previous build has failed.
0 (0% of all builds triggered)
1 (33% of all builds triggered)
1
Build Completed Code commits Tests
FRR › FRR › #98 2 years ago
bgpd: fix display of ethernet vpn route prefix in vty
L2VPN route prefix are composed of ethtag, mac address and ip address.
vty command "show bgp l2vpn rd <>" show macip prefix in the following
template: [ethtag][macaddress/len][ipaddress/len]

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>

e
2406 passed
FRR › FRR › #16 2 years ago
bgpd: configure preserve forwarding state from vty
Preserve forwarding state bit can be set in OPEN message with the use of
new vty commands
bgp graceful-restart preserve-fw-state
no bgp graceful-restart preserve-fw-state

This must be set before activating the connection to a peer, since it is
for forging graceful restart capability of OPEN messages.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
bgpd: enable send of Graceful Restart Preserve State F bit
Enhance struct bgp to add a new flag BGP_FLAG_GR_PRESERVE_FWD, which
allow to set the Preserve State F bit of Graceful Restart capability in
OPEN messages.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
2805 passed
FRR › FRR › #14 2 years ago
bgpd: set Graceful Restart R bit for vpnv4 address family
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
bgpd: graceful restart for vpnv4 address family
This patch enable the support of graceful restart for routes sets with
vpnv4 address family format. In this specific case, data model is
slightly different and some additional processing must be done when
accessing bgp tables and nodes.
The clearing stale algorithm takes into account the specificity where
the 2 node level for MPLS has to be reached.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgpd: support End-Of-Rib of VPNv4 address family
After graceful restart procedure, when BGP speaker has finished to send
its VPNv4 routes to the restarting peer, it also sends End-Of-Rib
message for afi=AFI_IPv4 safi=SAFI_MPLS_VPN.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
2805 passed
Build Completed Code commits Tests
Build Completed Code commits Tests
FRR › FRR › #16 2 years ago
bgpd: configure preserve forwarding state from vty
Preserve forwarding state bit can be set in OPEN message with the use of
new vty commands
bgp graceful-restart preserve-fw-state
no bgp graceful-restart preserve-fw-state

This must be set before activating the connection to a peer, since it is
for forging graceful restart capability of OPEN messages.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
bgpd: enable send of Graceful Restart Preserve State F bit
Enhance struct bgp to add a new flag BGP_FLAG_GR_PRESERVE_FWD, which
allow to set the Preserve State F bit of Graceful Restart capability in
OPEN messages.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
2805 passed